The file system compatibility is always a big issue between Mac and Windows. It's well known that by default, Windows uses NTFS, and Mac OS uses HFS, these file systems are not compatible with each other. Often switch between Mac and PC? Want to share one external hard drive between Mac and Windows? No worries! There are still ways to make external hard drive compatible with Mac and PC.
How To Use External Hard Drive on Mac Without Formatting As we have said earlier, OS X El Capitan or macOS Sierra cannot write to an NTFS (Windows) formatted drive, but it can read from it. There is a however a 'driver' available which will allow your Mac to write to NTFS-formatted drives. Even though full-featured NTFS drivers for Mac are usually available as paid solutions, sometimes you may legally use them at no cost with your external USB drives. Many external drive manufacturers partner with premium NTFS solution providers, to provide users full access to these tools for free when you purchase an external drive from them. Since Windows is still the most popular desktop OS, most external HDD comes preformatted with NTFS. This means you can use them on Windows with no problem. But on MAC, NTFS volume becomes read only i.e. You can only copy data from external HDD to your MAC but not the other way around. The typical part lies in answering the question 'How to mount a NTFS drive on Mac OS X'. Even though the Mac OS has this option it fails to initiate automatically. If the users want to use an NTFS drive in a Mac based pc then they have to remove the restriction to read/write either manually or by using a third party application.
Two ways to make external hard drive compatible with Mac and PC
FAT32, exFAT and NTFS are three file systems for external drive in Windows, while NTFS is read-only on Mac. Therefore, based on these three file systems, we have two methods to make external hard drive compatible with Mac and PC.
Method 1: Reformat this external hard drive (not recommend)
1. Reformat it as FAT32
As the oldest file system among these three file systems, FAT32 is compatible with a majority of recent and recently obsolete operating systems, including Mac and Windows. However, FAT32 can only support files up to 4 GB in size and A FAT32 partition must also be less than 8 TB. Thus, unless every file we plan to store on the disk is less than 4GB in size, we'd better avoid this method.
2. Reformat it as exFAT
The exFAT file system can also work with Mac and Windows. It eliminates the two major deficiencies of FAT32, which has no limitation on partition size or file sizes. And exFAT external hard drive is faster that FAT32 at reading and writing data. It's a great way to share external hard drive between Mac and Windows.
Method 2: Use an NTFS driver for Mac
NTFS is the default file system on Windows. But due to technical reasons and copyright issue, macOS only enables NTFS read support, but doesn't enable write support. To make your Mac compatible writing on NTFS, you can install a professionalNTFS driver for Mac like iBoysoft NTFS for Mac.
iBoysoft NTFS for Mac - the easiest way to manage NTFS external hard drives on Mac
iBoysoft NTFS for Mac is a professional and easy-to-useNTFS mounter for Mac that can mount NTFS formatted external hard drives, USB flash drives, SD cards, memory cards, etc. in read-write mode on Mac, making NTFS compatible with both Mac and Windows. We can use this utility on macOS 10.15/10.14/10.13/10.12 and Mac OS X 10.11/10.10/10.9/10.8. Mac os x 10 7 3 download.
Aside from what mentioned above, iBoysoft NTFS for Mac is also a wonderful manager for NTFS external drives. With this tool, we can open, mount, unmount, repair, and erase NTFS drive on Mac natively. Also, you can use this tool to reformat other disk to NTFS on Mac natively.
The NTFS format isn't one that's widely discussed, so you may be wondering: 'what is NTFS format, and why would I use it?'
In this article, we'll tell you what NTFS is, how you can use it on your Mac, whether there's an NTFS Mac alternative, and discuss the best ways to use the niche filetype on your Mac.
What is NTFS?
NTFS stands for NT File System, and was first developed for Windows NT version 3.1, where itw as the default file system for that operating system. Many external drives are formatted to NTFS by default, as Windows is more widely used than macOS.
Because it's a proprietary file system Apple hasn't licensed, your Mac can't write to NTFS natively. When working with NTFS files, you'll need a third party NTFS driver for Mac if you want to work with the files. You can read them on your Mac, but that's likely not going to suit your needs.
NTFS for Mac: How to Work with Windows Drives in macOS
How to reformat a hard drive mac. There are a few things you can do with NTFS files on your Mac beyond reading them. You can change the filetype to something else, but that can be tedious work! You can also tinker with Terminal and allow yourself writing privileges to NTFS, but that's not always advisable. Third party drivers and apps are your best bet, and come in several packages.
Some drivers are paid, and can be quite expensive. Others allow you to work with NTFS for Mac free, but free is not always the best option. Below are a few ways you can work with NTFS on your Mac, both native and third party.
Format to FAT32
Your Mac has an app named Disk Utility built into macOS that can help you reformat NTFS files to the FAT32 (file allocation table) format. Before you change the format of your NTFS files, consider what you have in them.
FAT32 isn't nearly as efficient as NTFS, which can cause data loss for high-quality videos or documents. This happens because disks formatted as FAT are allocated in clusters depending on their size. The breaking up of files means FAT disks need to be updated often; not doing so is a common reason for file quality loss. Larger files are broken into smaller pieces, and FAT disks need to be told often how to discover those disks.
This is one reason backing your Mac up is critical, and why you should have Get Backup Pro. The app allows you to schedule backups as you see fit, and can backup your entire system, or limited to the data you want to ensure gets saved. If you were to reformat a disk to FAT32, the first step you should take is backing your disk up to ensure no data is lost or corrupted.
Another app you should have on hand is Disk Drill for Mac. If you were tinkering with reformatting and corrupted a file you didn't back up, there's a chance your Mac has a copy of that file somewhere. Disk Drill helps you find it.
Use a third-party app
If you really want a safe way to work directly with NTFS files on your Mac, a third party app is the best bet. One of the best available third party apps for this is iBoysoft NTFS for Mac.
Living in your Mac menu bar, NTFS for Mac lets you quickly and easily work with drives formatted to the NTFS format, even external drives. You can quickly mount and unmount from the menu bar app, and the app allows full access to NTFS files so you can read, write, copy, delete, and transfer them without worry.
Convert mac files to pc free. NTFS for Mac is a great option for those who have to work with or on PCs often; you can edit NTFS files on your Mac without fear you will somehow damage them!
Enable NTFS write support in Terminal
Terminal is the direct way you can edit features and settings on your Mac, but it's a one-way street. Reversing things you do via Terminal can be difficult, and sometimes impossible. But, if you want to take the risk, you can enable NTFS write support in Terminal – just know it's a highly risky move that could corrupt your drive and files.
Here's how to do it:
- Open Terminal on your Mac
- Connect the drive formatted as NTFS
- Enter this command: sudo nano /etc/fstab
- Scroll to the end of the list, and enter this command: LABEL=NAME none ntfs rw, auto, nobrowse
- Press Control+O on your Mac keyboard
- Press Control+X on your keyboard
- Open Finder on your Mac
- In Finder, select ‘Go' in the menu bar
- From the Go menu, select ‘Go to Folder'
- Enter this in the 'Go to the Folder' field: /Volumes/NAME
Select ‘Go'
Note: This opens a full list of NTFS files your Mac recognizes. In the following step, replace 'NAME' with the name of the NTFS drive you're trying to alter.
Note: Remember to substitute the NTFS volume name for ‘NAME' in the step above
This should allow you full read and write access to your NTFS disk on the Mac.
Terminal is scary for many users – which is why you should give MacPilot a shot. It's a fresh interface for your Mac Terminal that avoids having to know specific commands, and is a far safer alternative to Terminal as it limits you to doing what's safe. There are roughly 1,2000 hidden Mac features MacPilot can help you quickly and easily discover and activate, all without having to enter a single Terminal command!
Use BootCamp to access NTFS drive
Bootcamp is Apple's method for allowing you to run Windows on your Mac natively, so using it to access and edit NTFS files is (currently) a safe bet. It downloads everything you need to run Windows on your Mac automatically, but there are a few catches.
It will delete all of your old Time Machine backups, if you're using Time Machine. This is another great reason to use Get Backup Pro!
Bootcamp is also on its way out. Macs with Apple Silicon running the newest version of macOS, Big Sur, will not have access to Bootcamp. It's unknown if Apple will simply disallow Bootcamp for all Macs, or just those running Apple Silicon chipsets.
Ntfs Driver For Mac
But if you run Bootcamp and boot into Windows on your Mac, you will be able to manage NTFS files.
Move files to the Cloud
Cloud services may not grant you write access to NTFS files, but they do let you duplicate, share, and sync NTFS files. All cloud services can host and share NTFS files, so pick your favorite cloud storage option and give it a try.
Many will even sync to your Mac, allowing you to move files within Finder and have them synced to the cloud without you having to drag and drop anything. Just open the drive you have your NTFS files in, and move them to your cloud storage. Apple's iCloud even syncs your desktop and Documents folders automatically, making it a far easier process to sync NTFS files to the cloud.
Can Mac Use Ntfs External Drive
Conclusion
NTFS files are still a fairly niche filetype, but when you need to access them it can be maddening to not have full access. If you try to make changes and mistakenly ruin your Mac's files, things can be even worse for you.
Happily, all the apps mentioned today – NTFS for Mac, Get Backup Pro, Disk Drill, and MacPilot – are available for free during a seven day trial of Setapp, the world's leading suite of productivity apps for your Mac. Along with these four incredible apps, you'll have unlimited access to the entire Setapp catalog of nearly 200 apps!
Using Ntfs On Mac
When your trial ends, Setapp is only $9.99 per month – an incredible deal, so why hesitate? Give Setapp a try today!
Meantime, prepare for all the awesome things you can do with Setapp.
Read onSign Up